Wood tree skin log debarker peeling processing machine
1. This machine is the rotor teeth with a unique force in stripping production, so that wood in the hopper tank plate section recurring cycle of movement, turning around its own axis to segment and irregular beating. To this paragraph with wooden teeth and keep the friction between the storage tank, fast bark are separated to achieve effective peeling effect.
2. One end to put in and the other for outlet, it's better than the rotary one which have to stop the motor to take the peeled branch out
3. Suitable for many different trees, especially the bend one have more high peeling rate than the traditional rotary type
4. The machine is fixed when working, so the power consumption and the failure rate is small and low noise
|Model||Capacity||Size||Motor||Debarking rate||Length of the wood||Diameter|
1. General introduction of wood bark peeling machine :
a. Wood debarking machine use open silo, from one side feeds materials, from the other side discharge. The assembly line operation to overcome the existing peeling machine feed, discharge, storage shortcomings and with high efficiency.
b. Due to the impact of gear teeth on wood, the wood logs in the bin for circulating movement, so stripping efficiency is high. The peeling rate could reach 95%.
Wood debarker/Barking/peeler machine is suitable for large,medium and small paper mills, pulp mill, wood factory, wood processing plant, forestry factory, timber yard, artificial board factory (such as plywood plant, medium density fiberboard factory etc.).
2. Operation of wood bark peeling machine :
a. Put the log and tree branches into the rotary drum,close the feeding baffle,then start the machine,with clockwise operation,the cutter will strip wood skin.
b. Fifteen minutes later,stop the machine,open discharging baffle, then start the machine and counterclockwise run two minutes,the peeled wood can be automatically sent out by roller.