Charcoal and Coal Briquette Extruder Machine (WSMB)
What kind of materials can be used for this machine:
Coal/charcoal powder from coal ash, coal mud, coke powder, coking coal and other kind of coal and charcoal. If the size of these materials is too big, you need to crush them into less than 3mm. If your raw materials have big size, it is difficult to press and shape in the process of making sticks,
Any kind of agro-wastes: Such as rice husks, crop stalks, wheat brans, groundnut shells, paddy straw, coffee shells, palm shells, sunflower stalk, cotton stalks and so on! Of course, sawdust and any kind of wood chips can also be used! (to use these materials, they need to be carbonized with a carbonization stove firstly! )
| Model |
Capacity |
Power |
Final products diameter |
Dimension |
Weight |
| WSMB-140 |
500-2000kg/h |
7.5-11kw |
30-40mm |
2060×1290×980 |
900kg |
| WSMB-180 |
1000-3000kg/h |
18.5-22kw |
30-60mm |
2320×1000×890 |
1800kg |
Raw Materials: (water content lower than 12%) Sawdust, charcoal ,coal rice husk ,stalk smaller than Length 5mm. Diameter 3mm
Working Principle:
Use the principle of spiral extrusion, compressed the prepared pulverized coal into a certain intensity of cylinder or plum-flower shaped through extruding.
Coal briquette extruder is the main equipment in the system of molding fuel,it squeeze powdered coal into a certain hardness coal briquette sticks (various shapes according to customer's requirements),in place of block coal,it can make full use of coal dust to reduce fuel cost
Feature for coal dust pelletizing machine / briquette machine
1, adopts hard tooth face reducer , small size, and high bearing capacity
2, The internal impeller blade of Coal rods extruder adopts the thick impeller design; the impeller and cylinder lining board adopts wear-resistant materials;
3,The life span is 4-5 times longer than the ordinary material.
4,The exit of the coal rods in the head part adopts replaceable wear resistance alloy steel, which is easy to exchange.
){kind=link}