Factory Selling Hydraulic Coal and Charcoal Briquette Forming Machine

• Pressing Mode: Extrude
• Product Shape: Square Shape
• Motor Type: AC Motor
• Condition: New
• Type: Coal Mine Support Equipment
• Key Word 1: Briquette Machine
• Model NO.: WSCC
• Key Word 2: Coal Briquette Machine
• Key Word 3: Charcoal Briquette Machine
• Transport Package: Wooden Cases
• Specification: 2 cubic
• Trademark: WS
• Origin: Henan
• HS Code: 2513200000
• Production Capacity: 100 Sets Per Month

Product Description

Factory selling Hydraulic coal and charcoal briquette forming machine

Introduction
High efficient coal briquette machine is an equipment which can press variety of coal powder, coal dust, coal slime, coking coal, coke powder, aluminum powder, iron powder, iron scurf, iron oxide skin, active carbon, slag, gypsum, limestone, plastic, kaolin and tailings into ball.


The requirements of raw materials
1. The materials powder size must be less than 4 cm. If not, you should crush it firstly.
2. Any raw materials with metal is not allowed, otherwise it will damage the surface of rollers.

The applications of end products
1. Home heating stoves;
2. Hot water boilers and the industrial boilers;
3. Easy transportation for powdered materials.


Features
---the roller is made by hard materials, with good wear resistance and long life time;
---the service life of wearing parts is up to 4000 hours;
---the machines electricity cost reduces by 60%;
---the machine is easy to operate and maintain;
---the molding material is energy-saving, easy to transport and higher utilization of waste.
---the final product is smokeless, non-toxic, none peculiar and environmental protection.
---the end products shapes include oval, round, square, ball egg-shaped and pillow-shaped.



Working principle of coal briquette machine
Coal briquette machine will pass the power on to the two pressure roller through the reducer.
The two sides and roll rotation, in both the rotating roll, natural materials to enter the ball roll mode, with the roll rotation, material pressure on a small become larger, when the material to the two rollers rotating line contact point, the pressure of materials has reached the peak. Tremendous pressure in the role of line, the materials becomes a finished product from the powder ball.


Specification: 

Model	WSCC-290	WSCC-360	WSCC-430	WSCC-500	WSCC-650	WSCC-750	WSCC-850
Capacity	1-3t/h	3-4t/h	6 t/h	10t/h	15t/h	22t/h	30t/h
Roller width	200mm	250mm	280mm	300mm	336mm	400mm	500mm
Diameter of roller sheer	290mm	360mm	430mm	500mm	650mm	750mm	850mm
Motor power	5.5kw	7.5kw	15kw	18.5kw	22kw	45kw	55kw