| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Application of orange juice machine:
The industrial orange juicer is suitable for extracting juice from fruits and vegetables such as tomatoes, pineapples, carrots, apples, aloe vera, cacti, etc.
Description of apple juice maker:
The Components of the machine included: Front support, hopper, spiral shaft, Filter net, juice holding device, back support, Out slag notch, and so on. The screw shaft is supported on the bearing seat, the right end is supported on the wheel bearing seat, motor by a pair of belt wheels drives the screw shaft through the operation.
Working principle of electric orange juicer:
1) The working process of the electric orange juice machine. First, the power is input from the power part, and the extrusion torque is transmitted from gear 7 to drive the entire extrusion screw roller 4 to rotate in the direction shown in the figure.
The raw material is continuously put into 1 place for pressing; the raw material enters the barrel and is continuously pushed to the left under the action of the screw roller 4, the cross-sectional area is continuously reduced from A1 to A3 and is 0 in the limit state, and the extrusion is realized; the residue and juice are drawn out from the juice 5 starts to separate gradually, and finally realizes the slag 6 at the left end of the extrusion cylinder 2, and the juice flows out with the surface of the extrusion cylinder 2. Among them, A3/A1=slagging rate (slagging rate+juicing rate=100%).
2) Extrusion cylinder follow-up control. During the extrusion process, extrusion cylinder 2 is designed to move laterally and left and right, mainly considering the instability of the raw material juice content or the change of the slag rate/juicing rate during the juicing process (such as sugarcane with different sugar content or different parts of sugarcane). etc.) cause a great change in the force between the screw roller, the extrusion cylinder, and the raw material, resulting in power waste and a high slag rate.
By adding the follow-up block 8 to be integrated with the extrusion cylinder 2, the spring 9, and the hydraulic cylinder 10; the extrusion cylinder 2 can be adjusted promptly according to different raw materials and different slag rates during the juice extraction process, and the extrusion cylinder 2 and the extrusion screw the relative position of the roll 4 in the lateral direction can be controlled more precisely, and the slag rate and the extrusion force can be controlled more accurately, and the work efficiency can be improved. Its essence is to make the cross-sectional area A3 adjustable, which is achieved by controlling the ratio of A3 to A1, that is, the slag yield.
3) Spiral roller cone guide. Between A1 and A3, a spiral guiding structure is added to the conical surface part of the right end of the extrusion screw roller 4, which is no longer a common smooth conical surface; while the cross-sectional area of the raw material changes gradually, the guiding residue follows the spiral groove to the right. Move until the right end of the extrusion cylinder 2 leaves, and the slag 6 is realized. Avoid the slag staying in the roller gap and wedging tightly to cause the slag to be unsmooth.
Technical information of commercial orange juice machine:
|
Model of an automatic orange juicer Description |
0.5 |
1.0 |
1.5 |
|
Capacity |
200-500Kg/h |
1000Kg/h |
1500Kg/h |
|
Spiral diameter |
Φ87.5mm |
Φ120mm |
Φ175mm |
|
Filter aperture |
0.6mm |
0.6mm |
0.6mm |
|
Power |
1.5Kw |
2.2KW |
4Kw |
|
Spindle speed |
400rpm |
400rpm |
|
|
Weight |
~105Kg |
175KG |
~250Kg |
|
Size |
909×320×833mm |
1250x500x1100mm |
1600×500×1350mm |
|
Feeding size |
0.25m*0.25m |
0.35*0.35 |
0.4m*0.45m |
The working way of the orange juice maker machine:
Screw shaft clockwise rotation along the direction of the Slag outlet, the bottom diameter slowly becomes big but the Pitch narrows gradually when material is pushed by the screw shaft, Due to the spiral chamber narrows gradually, thus forming the material press.
Fruit and vegetable products join the hopper, the screw shaft propulsion, and compression, by squeezing out the juice through a filter into the bottom of a juice holding device, and the slag by the axis of the screw and regulating head taper portion is formed between the annular gap discharge, pressure head can adjust the size of the gap, to adjust the slag resistance, can change the slag rate.
Why Choose Us?
){kind=link}