1200-1500kg/H Coconut Shell Wood Charcoal Continuous Carbonization Furnace
|FOB Price:||US $7,999 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $7,999/ Piece|
|Production Capacity:||100 Sets\Year|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram, cash|
- Model NO.: GMEC series
- Place Style: Horizontal
- Type: Continuous Carbonization Furnace
- Fuel: Furnace
- Capacity: 300-2000kg\H
- Key Word 1: Charcoal Carbonization Furnace
- Specification: 20 container
- Certification: CE, ISO
- Range of Applications: Industrial
- Usage: Sawdust, Briquette and So on
- Clour: Client Requirement
- Key Word: Carbonization Furnace
- Trademark: Runxiang
- Origin: Henan
1200-1500kg/h Coconut shell wood charcoal Continuous Carbonization FurnaceCompared with the previous generation of vertical multiple screw tube carbonization machine:
1,This new type have sharply reduced the mechanical transmission parts, more reasonable design, reduce 80% of the failure rate.
2,Feed particle size increase more than 20-30mm,reach to 50mm.
3,Rotary design the carbonizer drum continuously,avoid from the lack of heating the certain point(vertical type-the carbonzing tube will bend and leaked at last), extend the lifetime of the carbonizer greatly.
4,The output capacity,Carbonized uniformity and the the quality of the charcoal are improved greatly.
This carbonization furnace is fueled by the syngas(carbon monoxide, methane, ethane etc.) from the furnace itself.The biomass raw material will produce plenty of combustible gas during the pyrolysis of the carbonzation process,the syngas will became pure combustible gas after wood tar, wood vinegar other impurities was isolated by the filter and purification system (gas cleaner / dust-removal / purify tank / scrubber) The gasifier is used to preheating the carbonizer,when the temperature reach to 300ºC,the feeding screw conveyor start to feeding raw material into the carbonizer.the material will produce fuel gas,which will be collected and used to heating the carbonizer after cleaning by the filter and purification system. The temperature of carbonizer will control at 600 degrees Celsius.When the carbonizer can produce enough flue gas and reach to self sufficient combustion, close the gasifier and open all the flue gas valve of the carbonizer gradually, finally achieve flammable gas self-sufficiency carbonization.
Continuous Horizontal Sawdust Rice Husk Carbonization Machine Working Process
1 if with the Gasifier,first some raw material;such as sawdust,rice husk,and etc,about 100-200kg/time,burning material in gasifier,producing Combustible gas,the put material to carbonization furnace
2;If without gasifier,we suggest use natural gas,liquefied gas to burning and heating
carbonizatino furnace,It's more clean and environmental protection than use gasifier,
heating the furnace about 40minutes to 1 hour,the working temperature is increasing
3;For different raw material,we suggest different temperature to put raw material
For low density material;such as sawdust,rice husk and jute stick,put material to
carbonization furnace when temperature reach 300ºC,but highest carbonization temperature can't higher then 400-450ºC,
For high density material;such as coconut shell,palm kernel shell,when temperature reach
380-400ºC put material into carbonization furnace,carbonizing temperature is 450-500ºC,
Highest carbonizing temperature can't higher then 600ºC.
4; carbonizing time about is 20-30 minutes,we match two pcs screw conveyor for carbonization
Furnace's top and end to conveying material to carbonization furnace
Raw Material and Final Product
Raw material size as;sawdust,rice husk,just stick,coconut shell,palm kernel shell and etc,
Input raw material size need less then 5cm,humility need less then 10%,if material
humility higher 10%,it need first before carbonizing,
For low density material,suck as rice husk,sawdust,jute stick,about 3.1-3.2 tons raw material
could get 1tons charcoal,for high density raw material;such as coconuts shell,palm kernal shell,
About 2.6-2.7tons material could get 1 ton charcoal,
Continuous Horizontal Sawdust Rice Husk Carbonization Machine
For different material, this machine have different capacity
Low density raw material;rice husk,sawdust,jute stick,and etc
High density;raw material;coconuts shell.hard wood powder,palm kernal shell and etc
|Carbonization furnace body;diameter X length unit;meter|
|1m x 8m||1m x 12m||1.2m x 8m||1.2 x 12m|
material about 300-500kg/h ,deal with high density material 600-800kg/h
Other technical date for this machine
1;Output raw material temperature;50ºC.
2;Main carbonization furnace max temperature;800ºC.
3;Heating furnace max temperature could reach 1200ºC.
4;Carbonization furnace rotate speed is 3r/minute,It's adjustable
5;Carbonizing temperature is 20-30 minutes,from input raw material to out put charcoal