Wood chipping shaving Sawdust Air Flow Pipe Dryer
1.The raw material:rice husk,sawdust ,shavings, particle such as branches,wood chips which after crushing(The diameter ≤3mm,length≤5mm)
2.Working Capacity:When the airflow is 180°C,put the sawdust or rice husk which has the humidity 35% ,then dry to 10%.The temperature of airflow can not be lower then 180°C,and can reach to 300°C.
3.The fuel of this machine can be firewood,coal,gas heating or electric.
4.The finished product can be used for wood sawdust briquette,wood pellet.
Working principle:
One side of this machine is to get fire, the other side is a fan, the sawdust is running through the machine in order to drying.This small sawdust dryer refers to putting powder like wet wood sawdsut into the ring pipe under the airflow continuous force. When ignite the burning furnace, hot air enters pipe unter the force of blower. And wood sawdust exposed to dry and high temperature hot air. In this way, wet wood sawdust is dried into dry sawdust powder.
Brief introduction:
Drying is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.
Model No. |
WSII-1 |
Productivity (kg/h) |
250-300kg |
The diameter of the Materials |
<3mm&<5mm |
The temperature |
180C-250C |
Motor Power |
4kw |
Weight |
1200kg |
Size of the machine |
10*1.0*2.0m |
1.This small sawdust dryer refers to putting powder like wet wood sawdsut into the ring pipe under the airflow continuous force. When ignite the burning furnace, hot air enters pipe unter the force of blower. And wood sawdust exposed to dry and high temperature hot air. In this way, wet wood sawdust is dried into dry sawdust powder.
2.Main structure of small sawdust dryer
1.Electric cabinet 2.Induced Fan 3.Heating stove
4.Drying pipe 5.Air seal machinery 6.Cyclone
3. Other description of small sawdust dryer
1). Raw materials: rice husk, wood sawdust, and final small particles that being crushed from wood
shavings, wood branches and wood chips. Raw materials will be diameter less than 3mm, length is
less than 5mm;
2). Working capacity: when hot air temperature is 180 can dry wood sawdust with 35% relative
humidity into 10% relative humidity.
3). Fuel: firewood, coal, steam or electricity, etc.